The transient state in the oxidation of binary alloys forming the most-stable oxide: A numerical solution

The initial transient high-temperature oxidation stage for binary alloys forming the most-stable oxide has been examined by means of a numerical procedure based on the finite-difference method. At variance with previous models, the present treatment takes into account the effect of the rate of the reaction at the scale/gas interface over the corrosion kinetics. The calculations concerning the transient stage are developed either using the general parabolic rate law to represent the overall scaling kinetics or using the rate law of the reaction at the scale/gas interface as a boundary condition without imposing any particular rate law to the overall process. A correct analysis of the oxidation behavior of binary alloys during the transient stage must take into account the kinetics effect of the rate of the surface reaction. The concentration of the most-reactive element at the alloy/scale interface changes regularly with time, decreasing gradually from the initial bulk value to its final steady-state value. The present results are in good agreement with those obtained by means of an approximate analytical model developed previously.     

Determination of heavy metals and volatile aromatic compounds in used engine oils and sludges

Assessment of contaminant releases during utilization of used oils is essential for the determination of environmental acceptability. These paper reports the results of the study examining a toxic metal leachability from used engine oil and sludge samples employing leaching test (TCLP). The leaching test indicated that lead in oil samples exceeded 5-ppm concentration level what qualified them as a toxic waste. The samples of contaminated sludge were found to contain high concentration of total lead, barium and chromium, but the leaching test showed concentration below regulatory limit. The total content of benzene, ethylbenzene, toluene, and xylenes (BETX), and naphthalene in used oil and sludge samples was also determined and was found not to be a significant factor to contamination.     

Activity of gold towards methylamine electrooxidation

The kinetics of methylamine oxidation at a gold electrode in contact with an alkaline electrolyte solution was studied. The adsorptive behaviour of substrate molecules was determined by changes in the differential capacitance of the double layer at the electrode/solution interface. The electrooxidation of methylamine occurs only in the potential range of gold oxide layer formation. The general reaction pathways of methylamine oxidation on the gold electrode is proposed.     

On reactive routing protocols in ZigBee wireless sensor networks

ZigBee is the primary standard solution for wireless sensor networks, implementing the Ad hoc On‐Demand Distance Vector (AODV) protocol in the network layer and supported by the standard IEEE 802.15.4. This study is focused on mesh topologies and the critical problems encountered when AODV is executed in conjunction with the Carrier Sense Multiple Access with Collision Avoidance protocol. These problems are mainly related to the packet overhead required to carry out route creation. To perform preliminary experiments to be able to implement AODV in a real network, a new metric is proposed herein. This metric uses fuzzy logic to help in the decision‐making process. The objective of the fuzzy routine is to determine, during the route‐discovery process, the best node to forward request/reply packets, with the aim of reducing packet overhead and energy consumption. Moreover, minor changes are also added to the discovery procedure of AODV to improve the performance of the route‐creation process. This intelligent version of AODV has provided promising experimental results, greatly reducing the number of packets required, with the consequent energy saving while selecting the best nodes to be part of the routes.     

The effect of grazing intensity and the presence of a forage legume on nitrogen dynamics in Brachiaria pastures in the Atlantic forest region of the south of Bahia, Brazil

It has been shown that with careful grazing management and addition of Pand K, but not N, fertilisers Brachiaria pastures are ableto maintain sustainable live weight gains over many years. However, standardon-farm practice, which generally involves high stocking rates, leads after afew years to pasture decline due mainly to N deficiency for grass regrowth. Togenerate an understanding of the mechanism of pasture decline and possiblemanagement options to mitigate this process, a study was performed in theAtlantic forest region of the south of Bahia state to study the N dynamics inpastures of Brachiaria humidicola subject to threedifferent stocking rates of beef cattle, with and without the presence of theforage legume Desmodium ovalifolium. Despite the fact thatthe C:N ratio of the deposited litter was high (60 to 70) the rate ofdecomposition was very rapid (k –0.07 gg^–1 day^–1) and annual rates of Nturnover through the litter pathway were between 105 and 170 kg Nha^–1 year^–1. In the grass-onlypasturesas stocking rate increased from 2 to 3 head ha^–1, N recycledinthe litter decreased by 11%, but a further increase to 4 headha^–1 decreased N recycling by 30% suggesting thatbeyonda certain critical level higher grazing stocking rates would lead to pasturedecline if there was no N addition. High stocking rates decreased theproportionof the legume in the sward, but at all rates the concentration of N in both thegreen and dead grass in the forage on offer and in the litter was higher in themixed sward. The presence of the legume caused a decrease in the C:N ratio ofthe microbial biomass while both soil N mineralisation and nitrificationincreased. This increased rate of turnover of the microbial biomass and thecontribution of N₂ fixation to the legume resulted in largeincreasesin the N recycled via litter deposition ranging from 42 to 155 kg Nha^–1 year^–1.     

Energy Efficiency of an Indirect Thermally Coupled Distillation Sequence

Several thermally coupled distillation sequences have been proposed to improve the thermal inefficiency of conventional distillation sequences. Particularly, for the separation of ternary mixtures, structures that perform a lateral extraction in one of the columns of the integrated arrangement have been shown to provide significant energy savings. The structure of existing sequences, based on conventional distillation columns, might provide the basis for alternate thermally coupled designs. In this paper, it is shown how a thermally coupled system derived from an indirect conventional sequence can provide energy savings through a proper optimization of the interconnecting streams.     

Performance of a Vertical‐Slot Fish Pass for the Sea Lamprey Petromyzon marinus L. and Habitat Recolonization

In 2011, a vertical‐slot fish pass was built at the Coimbra Açude‐Ponte dam (Mondego River, Portugal), approximately 45 km upstream from the river mouth. The performance of this infrastructure for sea lamprey passage was evaluated between 2011 and 2015 using several complementary methodologies, namely radio telemetry [conventional and electromyogram (EMG)], passive integrated transponder (PIT) telemetry and electrofishing surveys. During the study period, the electrofishing revealed a 29‐fold increase in the abundance of larval sea lamprey upstream of the fish pass. Of the 20 radio‐tagged individuals released downstream from the dam, 33% managed to find and successfully surpass the obstacle in less than 2 weeks, reaching the spawning areas located in the upstream stretch of the main river and in one important tributary. Fish pass efficiency was assessed with a PIT antenna installed in the last upstream pool and revealed a 31% efficiency, with differences between and within migratory seasons. Time of day and river flow significantly influenced the attraction efficiency of the fish pass, with lampreys negotiating it mainly during the night period and when discharge was below 50 m³ s^?1. Sea lampreys tagged with EMG transmitters took 3 h to negotiate the fish pass, during which high muscular effort was only registered during passage, or passage attempts, of the vertical slots. The use of complementary methodologies provided a comprehensive passage evaluation for sea lamprey, a species for which there is a considerable paucity of valuable data concerning behavioural, physiological and environmental influences on obstacle negotiation. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.     

CHARACTERIZATION OF EVA-BASED ADHESIVES CONTAINING DIFFERENT AMOUNTS OF ROSIN ESTER OR POLYTERPENE TACKIFIER

Different amounts (50-170 php--parts per hundred parts of EVA, 33-63 wt%) of two tackifiers (hydrogenated rosin ester, polyterpene resin) were added to an ethylene vinyl acetate (EVA) copolymer containing 28 wt% vinyl acetate. The EVA and the tackifier were characterized using infrared (IR) spectroscopy, DSC measurements, and stress-controlled plate-plate rheology. The properties and compatibility of the EVA-tackifier mixtures were studied using DSC, DMTA, and stress-controlled plate-plate rheology. Immediate adhesion was measured as a quantification of tack, and the T-peel strength of roughened styrene-butadiene rubber/EVA-tackifier adhesive joints was also obtained. The increase in the amount of tackifier noticeably changed the crystallinity of polyethylene blocks in the EVA, and the temperature at the cross-over between the curves of the storage and loss moduli as a function of the temperature was displaced to a lower value. Whereas the hydrogenated rosin ester was compatible with the amorphous ethylene vinyl acetate copolymer regions of the EVA (Tg value increased) reducing its crystallinity, the polyterpene resin was compatible with the polyethylene blocks of the EVA (T g value was not modified), increasing its crystallinity. Immediate adhesion of the EVA-tackifier mixtures was improved by adding both hydrogenated rosin ester and polyterpene tackifiers. On the other hand, there was an optimum tackifier content at which the maximum T-peel strength value was obtained.